FL3X Device-S

Multifunctional bus control unit

Article number: 3-V0860A01

The multifunctional bus control unit FL3X Device-S supports the current and upcoming bus systems and has one variable interface, so it covers most of the application fields where bus interfaces are required.

Request Device

Add to favorites Remove from favorites

Product Information

Description

FL3X Device-S is the starter of the FL3X Device product familiy which is used and recognized by many car manufacturers and component suppliers in their automotive electronics development. The FL3X Device family provides manifold solutions for

gateways between different automotive bus systems
bus interfaces
remaining bus simulation
signal manipulation
data logging
rapid prototyping

Advantages

ARM Cortex A9 Dual Core (800 MHz) with 1 GByte DDR3 RAM
Up to 14 bus channels
2 x CAN-HS channels
2 x CAN-FD/HS channels*
1 x FlexRay A channel (SelfSync)*
1 x FlexRay B channel (SelfSync)*
1 x 100BASE-T1 channel*
1 x LIN channel
1 flexible FL3X Tiny3 Slot for additional bus/network transceivers (2x CAN-FD/HS or 4x CAN-FD/HS or 2 x FlexRay (1 A-channel / 1 B-channel) or 2 x 100BASE-T1 or 4 x LIN & 2 x SENT- channels)
Integrated WiFi module
D-sub connectors for automotive bus systems
Wake-up/sleep mode support
Startup <200 ms possible
Micro SD card slot
IP20

Temperature range - 40°C to + 85°C

* The base unit provides the bus systems CAN-HS and LIN. To ust the bus systems FlexRay, CAN-FD or 100BASE-T1, additional licenses are required.

Technical Details

Altera Cyclone V SOC (integrated ARM Cortex A9 dual core CPU)
1 GByte DDR3 RAM
3 D-sub bus connectors with fixed and pluggable transceivers - Up to 4 bus interfaces on each connector
Supported automotive bus systems - Up to 4 FlexRay controllers (Bosch E-Ray cores)* - Up to 2 FlexRay channels (2*channel A and 2 channel B) available on the connectors
A connector with 2 FlexRay cores provides SelfSync - Up to 4 CAN-FD controllers* - Up to 6 CAN-HS controllers* - Up to 3 100 MBit/s Ethernet controllers*
Wake-up/sleep mode support (wake-up possible via FlexRay or CAN)
1 GBit/s Ethernet configuration interface via RJ45
Integrated 1 GBit/s Ethernet switch
Micro SD card slot
4 digital inputs/outputs, or analog inputs (ADIO) via D-sub

*several bus combinations are possible, please contact us regarding your desired bus configuration.

Downloads

Specsheet specsheet_fl3x-device-s.pdf 1.67 MB Download

Driver Windows / Linux fl3x_driverpackage_2024-06-18.zip 501.12 MB Download

Trainings

FL3X Training SOME/IP & Ethernet

Make your communications future-proof! In our new training course SOME/IP & Ethernet we will provide you with all the technical knowledge you need. Whether in German or English, you can choose in which language the training takes place. You will receive the documents in English. You can also decide where your individual training takes place: at the STAR® site in Göppingen, at your premises, or online.

View training content Request FL3X Training

FL3X Training FL3X Config

The FL3X Config software provides solutions for even the most complex of technical networking challenges. No matter what task you’re dealing with – whether it’s to do with restbus simulation, rapid prototyping, gateway nodes or signal manipulation – FL3X Config has the right solution. FL3X Config is intuitive and can be adapted to your own use case.

View training content Request FL3X Training

Matching Products

FL3X Device-L²

The multifunctional bus control unit FL3X Device-L² supports the current and upcoming bus systems and has numerous variable interfaces, thus covering most of the application fields where bus interfaces are required.

Details

FL3X Config

FL3X Config is a software to generate a hardware assisted RBS and Gateways. Several network description formats are supported. The generated RBS runs independently on a separate hardware.

Details

FL3X Config mobile

The FL3X Config mobile software visualizes CAN, LIN, FlexRay and Ethernet data on a smartphone or tablet. For this, a wireless connection is established via WiFi with a suitable bus interface.

Details

FL3X Config SDK

FlexConfig SDK is a .NET lib for the easy access of automotive bus systems in your own windows applications. The Library supports a wide range of automotive network description formats like AUTOSAR (.arxml) or CANdb.

Details

FL3X Device-L

The multifunctional bus control unit FlexDevice-L supports the current and upcoming bus systems and has numerous variable interfaces, thus covering most of the application fields where bus interfaces are required.

Details