FL3X Device-L²

Multifunctional bus control unit

Article number: 3-V0870S03

The multifunctional bus control unit FL3X Device-L² supports the current and upcoming bus systems and has numerous variable interfaces, thus covering most of the application fields where bus interfaces are required.

Request Device

Add to favorites Remove from favorites

Product Information

Description

FL3X Device-L² is the flagship of the FL3X Device product range, which is used and recognized by many car manufacturers and component suppliers in their automotive electronics development. The FlexDevice family provides manifold solutions for:

gateways between different automotive bus systems
bus interfaces
remaining bus simulation
signal manipulation
data logging
rapid prototyping

Advantages

5 bus connectors that can be allocated flexibly via pluggable transceivers (2-6 bus interfaces on each bus connector)
The following maximum interfaces* can be reached: 8 FlexRay controllers (8 Bosch E-Ray Cores); 10 FlexRay channels; 20 CAN-FD / CAN-HS; 10 Standard Ethernet (100BASE-TX); 7 Automotive Ethernet (1000BASE-T1, 100BASE-T1); 30 SENT/LIN – (*Depending on the combination of the pluggable transceiver and available FPGA-Images)
2 ARM Cortex A9 Dual Core (800 MHz) with 2 GByte DDR3 RAM
Integrated WiFi module
Wake-up/sleep mode support
Startup <200 ms
Temperature range - 40°C to + 85°C

Technical Details

2 Altera Cyclone V SOC (integrated ARM Cortex A9 Dual Core CPU)
2 GByte DDR RAM
5 bus connectors that can be allocated flexibly via pluggable transceivers
2-6 bus interfaces are available on each bus connector
Up to 8 FlexRay controllers (8 Bosch E-Ray Cores)
Up to 10 FlexRay channels (5 channel A and 5 channel B) available on the bus connectors
In any case, 2 FlexRay cores can be connected internally (SelfSync)
Up to 20 CAN-HS bus interfaces
Up to 20 CAN-FD bus interfaces
Wake-up/sleep support (wake-up possible via FlexRay or CAN)
Up to 10 100 Mbit/s Ethernet bus interfaces
Up to 10 100BASE-T1 bus interfaces
1 Gbit/s Ethernet configuration interface
Integrated 1 Gbit/s Ethernet switch
One internal and one external Micro SD card slot
4 digital inputs or outputs (DIO)
5 analog or digital inputs (ADI)
Integrated WiFi module (b/n/g)

Downloads

Specsheet specsheet_fl3x-device-l2.pdf 1.85 MB Download

Driver Windows / Linux fl3x_driverpackage_2024-06-18.zip 501.12 MB Download

Trainings

FL3X Training SOME/IP & Ethernet

Make your communications future-proof! In our new training course SOME/IP & Ethernet we will provide you with all the technical knowledge you need. Whether in German or English, you can choose in which language the training takes place. You will receive the documents in English. You can also decide where your individual training takes place: at the STAR® site in Göppingen, at your premises, or online.

View training content Request FL3X Training

FL3X Training FL3X Config

The FL3X Config software provides solutions for even the most complex of technical networking challenges. No matter what task you’re dealing with – whether it’s to do with restbus simulation, rapid prototyping, gateway nodes or signal manipulation – FL3X Config has the right solution. FL3X Config is intuitive and can be adapted to your own use case.

View training content Request FL3X Training

Matching Products

FL3X Config SDK

FlexConfig SDK is a .NET lib for the easy access of automotive bus systems in your own windows applications. The Library supports a wide range of automotive network description formats like AUTOSAR (.arxml) or CANdb.

Details

FL3X Config

FL3X Config is a software to generate a hardware assisted RBS and Gateways. Several network description formats are supported. The generated RBS runs independently on a separate hardware.

Details

FlexConfig Developer

FlexConfig Developer is a cost-effective, powerful and user-friendly design and configuration software for automotive networks.

Details

FL3X Device-L

The multifunctional bus control unit FlexDevice-L supports the current and upcoming bus systems and has numerous variable interfaces, thus covering most of the application fields where bus interfaces are required.

Details

FL3X Device-S

The multifunctional bus control unit FL3X Device-S supports the current and upcoming bus systems and has one variable interface, so it covers most of the application fields where bus interfaces are required.

Details