This website requires Javascript for some parts to function propertly. Your experience may vary.

FL3X Config mobile for complex networking technology | STAR ELECTRONICS

FL3X Config mobile

Bus Analyzer Software for CAN, LIN, FlexRay & Automotive Ethernet

Article number: 3-V1140B01-01

The FL3X Config mobile software visualizes CAN, LIN, FlexRay and Ethernet data on a smartphone or tablet. For this, a wireless connection is established via WiFi with a suitable bus interface.

Request product
Add to favorites Remove from favorites

Product Information

Description

The FL3X Config mobile software visualizes CAN, LIN, FlexRay and Ethernet data on a smartphone or tablet. For this, a wireless connection is established via WiFi with a suitable bus interface.

The system is ready to operate quickly and can be used without extensive expert knowledge. New display sets can be generated and saved in no time at all. The high-resolution touch screens of current tablets facilitates a clear depiction of the required signals.

Advantages

  • Wireless visualization of CAN, LIN, FlexRay and Ethernet data

  • Support of Android devices version 4.4 to 12

  • Display of signal values in different diagrams (speedometer, graph, signal set, label)

  • Short-term logging with labelling via language recording

  • Supports different database formats, e.g. AUTOSAR (*.arxml), FIBEX (*.xml), CANdb (*.dbc) and LDF (*.ldf)

  • FL3X Config projects can be loaded

  • Bus tracing possible

Technical Details

Technical Details

Data communications via WiFi

One WiFi bus interface parallel usable

Supports the following formats:
> FIBEX (*.xml): 2.0.0d, 2.01, 3.0.0, 3.1.0, 4.0, 4.1.1
> FIBEX+ 1.4
> AUTOSAR (*.arxml): 3.02, 3.1.0, 3.1.4.DAI.2, 3.1.4.DAI.4,
3.2.2, 4.0.3, 4.1.1, 4.2.1, 4.2.2, 4.3.0, 4.3.1, 4.4.0, 4.6.0
> CANdb (*.dbc) and LDF (*.ldf)

Automatic interpretation of messages with loaded CANdb, FIBEX, AUTOSAR or LDF through the software

Creation of projects for all devices of the FlexDevice family that are fully compatible with FlexConfig RBS

Sending of CAN-FD/HS and LIN messages

Receiving of FlexRay, CAN-FD/HS, LIN and Ethernet messages

Partial support for SOME/IP

Three display modes are supported: chronologic, cyclic and graphic

Graphic display of bus/network communications as gauge, linechart, barchart, matrixchart, lamp, signal, text, button, timer

All displays can be zoomed or moved stage-free

Change between frame and PDU mode

Flexible generation of display sets depending on use case

Share projects between FlexConfig RBS and FlexConfig Analyzer

Create, start and save manipulations and sequences

Swiping between several graphic displays

Improved usability through automatic filter function

Simple logging on tablet/Android device in asc and mdf files

Logging with parallel voice recording possible

Support pre- and post-logging over 120 seconds before and after activation

Alarm function for data monitoring

Projects can be moved to other devices within the FL3X Device family in just a few steps

Listen-only mode

Downloads

Downloads
Specsheet specsheet_fl3x-config-mobile.pdf 1.32 MB Download
Usermanual fl3x_config_mobile_user_manual.pdf 8.19 MB Download
FL3X Config mobile App fl3x_config_mobile_v1.1.3.0.apk 99.21 MB Download

Trainings

FL3X Training SOME/IP & Ethernet

Make your communications future-proof! In our new training course SOME/IP & Ethernet we will provide you with all the technical knowledge you need. Whether in German or English, you can choose in which language the training takes place. You will receive the documents in English. You can also decide where your individual training takes place: at the STAR® site in Göppingen, at your premises, or online.

View training content Request FL3X Training
FL3X Training FL3X Config

The FL3X Config software provides solutions for even the most complex of technical networking challenges. No matter what task you’re dealing with – whether it’s to do with restbus simulation, rapid prototyping, gateway nodes or signal manipulation – FL3X Config has the right solution. FL3X Config is intuitive and can be adapted to your own use case..

View training content Request FL3X Training

Matching Products

Matching Products

FL3X Device-L

The multifunctional bus control unit FlexDevice-L supports the current and upcoming bus systems and has numerous variable interfaces, thus covering most of the application fields where bus interfaces are required.

Details
Back to top