This website requires Javascript for some parts to function propertly. Your experience may vary.

FL3X Interface-PCIe automotive bus interface | STAR ELECTRONICS

FL3X Interface-PCIe

Schnittstellenkarte

Artikelnummer: 3-V0952A01

Das FL3X Interface-PCIe ist die Mittelklasselösung des FL3X Schnittstellenfamilie im PCIe-Formfaktor. Ideal für den Einsatz in einem Logger oder in einem Mess-PC.

FlexCard PCIe3.

Product information

Beschreibung

With the FL3X Interface family a highly variable automotive bus interface solution for Dataloggers and PCs, which supports the current and upcoming bus and network systems via pluggable physical layer modules and the usage of a FPGA.

The FL3X interface-PCIe/PXIe has one FPGA for the hosting of bussystems and five FL3X Tiny3 slots for pluggable transceivers which can provide FlexRay, CAN-HS/FD/SIC, LIN/SENT, 10 BASE-T1S, 100BASE-TX and 100/1000BASE-T1 channels. Because of its free mountable slots and the FPGA, it can be extended with any available or upcoming FL3X Tiny3 and communication channel.

• PXIe interface

• FL3X Tiny3 exchangeable Physical Layer slots

• 5x M9 connector

• 3,3 V DC, 5 V DC and 12 V DC compatible PXI power supply

• 3,3 V and 12 V DC compatible PCI power supply

• LEDs signal the state of the network

ETHERNET

• Resolution of timestamp 1µs and 1ns possible (32/64bit)

• Access to the data packets by FL3X Interface API

• External synchronization by PTP

CAN-HS / CAN-FD

• Silent mode useable for listening without bus interference

• Configurable TX-acknowledges

FLEXRAY

• Asynchronous monitoring mode allows listening without FlexRay-Synchronicity

• Configurable TX-acknowledges

• Chronological correlation of bus messages with one timestamp base

• Extensive filter configuration available

Vorteile
  • Five pluggable transceiver modules (2-6 channels per module depending on the bus system)

  • Pluggable transceiver modules available for CAN-HS, CAN-FD, CAN-FD SIC, FlexRay, 100BASE-TX, 10BASE-T1S, 100BASE-T1, 1000BASE-T1, LIN, SENT*, K-Line*, RS232*, SPI*

  • Compact form factor

  • Synchronous timestamp generation for most of the bus interfaces(

    resolution up to 1 µs and 1ns)

  • Configurable bus termination

  • Bosch E-Ray IP core FlexRay controller

  • Bosch D_CAN IP core CAN controller

  • Bosch M_CAN IP core CAN-FD Controller

  • Intel Triple-Speed-Ethernet Ethernet controller

  • V2.1 A FlexRay protocol specification

  • V2.0 A/B CAN protocol specification

  • ISO 11898-1:2015 CAN protocol specification

  • Bosch CAN-FD specification 1.0

    * API possible but not available at the moment

Technical Details

Technical Details

PCIe Gen 1

Integrated Altera Cyclone V SOC (ARM Cortex-A9 Dual Core CPU)

5 bus connectors that can be allocated flexible via pluggable transceivers 
- 2-6 bus interfaces are available on each bus connector

Up to 3 FlexRay controllers (4 Bosch E-Ray Cores)*

Up to 6 FlexRay channels (3 channel A and 3 channel B) available on the bus connectors*

In any case, 2 FlexRay cores can be connected internally (SelfSync)

Up to 6 CAN-HS bus interfaces*

Up to 6 CAN-FD bus interfaces*

1 100BASE-T1 bus interfaces

PXIe form factor

Integrated Altera Cyclone V SOC (ARM Cortex-A9 Dual Core CPU)

* several bus combinations are possible, please contact us regarding your desired bus configuration.

Downloads

Downloads
SpecSheet specsheet_fl3x-interface-pcie_pxie.pdf 1.17 MB Download
Driver Windows / Linux fl3x_driverpackage_2024-06-18.zip 501.12 MB Download

Trainings

Matching products

Matching Products

FL3X Interface-L

The FL3X Interface-L is the middle-class solution of the FL3X Interface Family with a 1000BASE-T Uplink Port to the Logger or Measurement PC. It can be used with the Standard CMP or PLP Logger Protocol for the usage with a datalogger or alternatively as a full functional Interface.

Details

FL3X Interface-L²

The FL3X Interface-L² is the high-end solution of the FL3X Interface Family with a 1000BASE-T Uplink Port to the Logger or Measurement PC. It can be used with the Standard CMP or PLP Logger Protocol for the usage with a datalogger or alternatively as a full functional Interface.

Details

FL3X Interface-S

The FL3X Interface-S is the entry solution of the FL3X Interface Family with a 1000BASE-T Uplink Port to the Logger or Measurement PC. It can be used with the Standard CMP or PLP Logger Protocol for the usage with a datalogger or alternatively as a full functional Interface.

Details
FlexCard PXIe3.

FL3X Device-PXIe

The FL3X Device-PXIe combines a high-performance platform for real-time capable remaining bus simulations or gateways and up to 30 channel* measuring interface for automotive bus systems in one device.

Details
Back to top