Article number: 3-V0930A01-01
The FlexMedia 100BASE-T1 is a converter for 100BASE-T1 to 100BASE-TX and vice versa. With the FlexMedia 100BASE-T1, it is possible to connect an automotive Ethernet network to a standard PC for testing or diagnostic purposes.
The FlexMedia 100BASE-T1 is a converter for 100BASE-T1 to 100BASE-TX and vice versa. With the FlexMedia 100BASE-T1, it is possible to connect an automotive Ethernet network to a standard PC for testing or diagnostic purposes. It supports up to 100 MBits in full duplex mode on both sides.
Master and slave mode selectable via DIP-switch
Broadcom BCM89810 transceiver is used for the 100BASE-T1 conversion
Supply voltage: 8-48V DC
RJ45 connector for 100BASE-TX
D-Sub 9 pin male connector for 100BASE-T1
Temperature range - 40°C to +85°C
Supply voltage Operating
+8,0 V bis +48,0 V
Absolut maximum (non-operating)
-60,0 V bis +60,0 V
Supply current - operating
typ: 80 mA
RJ45, D-Sub 9
Dimensions approx. L x W x H
92 x 65 x 28 mm3
-40°C bis +85°C
-40°C bis +85°C
0% - 90% r. H., non-condensing
Make your communications future-proof! In our new training course SOME/IP & Ethernet we will provide you with all the technical knowledge you need. Whether in German or English, you can choose in which language the training takes place. You will receive the documents in English. You can also decide where your individual training takes place: at the STAR® site in Göppingen, at your premises, or online.
FlexSwitch1000BASE-T1 is one of the first 1000BASE-T1 Automotive Ethernet Switches on the market and can also score with special filter mechanisms. For each port of the switch, criteria can be defined that allow blocking of certain traffic on that port.Details